How to Reset San Jamar Soap Dispenser
Keeping your San Jamar soap dispenser in optimal working condition is essential for maintaining a clean and hygienic environment. Over time, the dispenser may require a reset to ensure it functions properly. In this article, we will guide you through the steps to reset your San Jamar soap dispenser, ensuring it is ready to dispense soap efficiently.
Step 1: Turn off the Power Supply
Before you begin the reset process, it is crucial to turn off the power supply to the soap dispenser. This will prevent any accidental damage or injury during the reset. Locate the power switch or outlet and turn it off.
Step 2: Open the Dispenser
Next, open the San Jamar soap dispenser to access the internal components. Most dispensers have a simple release mechanism or a latch that you can press to open the unit. Once open, you will see the soap reservoir and the internal components.
Step 3: Check for Obstructions
Inspect the dispenser for any obstructions or debris that may be causing the issue. Clean the area around the soap reservoir and the dispensing mechanism. If you find any clogs or blockages, use a small brush or needle to clear them.
Step 4: Reset the Timer
Locate the timer mechanism inside the dispenser. This is usually a small, round disk or a digital display. To reset the timer, turn it counterclockwise until it reaches the desired setting. If the timer is digital, press the reset button or navigate through the settings to reset it.
Step 5: Reassemble the Dispenser
Once you have reset the timer and ensured there are no obstructions, reassemble the San Jamar soap dispenser. Make sure all parts are securely in place and the dispenser is closed properly.
Step 6: Restore Power Supply
Now that the dispenser is reassembled, restore the power supply by turning on the power switch or plugging it back into the outlet. The dispenser should now be ready to dispense soap as intended.
Step 7: Test the Dispenser
Before using the dispenser again, test it to ensure it is functioning correctly. Press the dispensing button and observe if soap is dispensed. If it works properly, you have successfully reset your San Jamar soap dispenser.
By following these steps, you can easily reset your San Jamar soap dispenser and maintain a clean and hygienic environment. Regular maintenance and resets will help ensure the dispenser operates efficiently and effectively.
